Trevor Prior was inspired by Canadian canoe iconography, but looking for images better suited to his native Australia. A little experimentation, and his platypus inlay canoe began to take shape.
Many woodworkers take years to realize their dream of building a canoe, but Alex Cutting's story is unique in that he laid the first planks as a child and finished the work as a full-grown adult. His story struck us as a testament to patience and perseverance—and the final product was worth the wait.
When Jon Evans first sent us his scale model photographs, we thought he had the subject line mixed up. He said he'd built a scale model Redbird using an older kit of ours, but the canoe appeared to be sitting in a well-appointed, full-size workshop. On closer inspection, we realized Jon had not only built a handsome model canoe—he'd situated it in a charming and painstakingly detailed diorama.
When Doug Brentnell shared his building story with us, we couldn't resist asking him to write something for our blog. Doug's canoes are rich with history and personal significance, and we were moved by his comparison between canoe building and quilting. Here's the story of how he set out to build a canoe for each of his kids and grandkids using repurposed woods.
Some builders are eager to get started as soon as their kit arrives; others savour having a long-term project to chip away at. Sometimes life intervenes, and a canoe build has to be moved to the backburner for awhile. That was the case for Howard Shepherd, who ordered a kit in 2000. His Bob's Special was finished and launched 21 years later, completing a decades-long dream. The canoe was a continual source of inspiration, and we're grateful to Howard for sharing his story. Read on to hear it in his words.
"When I started planning out my canoe build, I thought a lot about how I would fabricate the station molds. Should I use try my luck at cutting them out by hand using my bandsaw, or should I get a CNC to do it?" Christian Delbaere explains how he built his own CNC machine using mostly 3D-printed parts in order to cut his station molds.
Almost by chance, Phil Winch came across several partially completed kayaks. He took the unfinished boats into his workshop, and now has a trio of beautiful wooden craft.
Photos of Steve Shergold's Ranger 15 attracted a lot of attention when we shared them on social media. The canoe itself looked great, but a lot praise was due to his clever additions, like a custom dog basket and wannigan that folds into a picnic table. We asked Steve if he might share the story of how he approached his build, and he generously replied with this detailed account.
In Part III of the Composite Canoe Building series, Randy Pfeifer succeeds in building his lightest canoe yet. See his process, the materials he used, and final thoughts in this concluding post.
In Part 1 of this series, Randy's first canoe off the mold was unexpectedly heavy. With his second attempt, he begins the process of shaving some weight from a Freedom 17 built using composite materials.
A few months ago, a beautifully printed book showed up in the Bear Mountain mailbox. It was a photo essay on the building of a Champlain canoe byKeith Mathieson, as chronicled by Nicki Endt. It was an unusual story and a beautiful canoe, and Keith and Nicki kindly agreed to let us share a part of it here.